Sharp VIEWCAMZ VL-Z5E - Manual (Page 82)

Digital Still Camera Features
Camera Recording
Digital Still Camera Features
72
Self-timer operating indicator
Recording with the
Self-timer
Available mode:
Card Camera
The self-timer function allows you to record
images after a time-lag of 10 seconds. This
is convenient when you want to record an
image of you and your friends together.
1
In Card Camera mode, press the
DISPLAY button until the mode
screen appears.
2
Press l or m on the Operation
button to select “SELF TIMER”, then
press the centre of the Operation
button.
3
Press l or m to select “EXECUTE”,
then press the centre of the Operation
button.
4
Press the PHOTO button to start the
self-timer.
• The self-timer operating indicator
flashes while the timer counts down.
• The shutter automatically releases
after 10 seconds, and a still image of
the subject is recorded.
To cancel the countdown
Press the PHOTO button in step 4.
To cancel the self-timer
Press the centre of the Operation button
again in step 3.
Notes:
• When recording with the self-timer, stabilize
the camcorder in the horizontal plane by
attaching it to a tripod, etc.
• Self-timer mode cancels after recording one
image. Repeat steps 1 to 4 to record another
image with the self-timer.
• Do not turn the power off or remove the card
once the self-timer operating indicator begins
flashing.
M E N U
S C E N E M E N U
E X E C U T E S E L F T I ME R
B L C G A I N /
8 1 / 9
NORMA L
A U T O
8 1 / 9
NORMA L
A U T O
C A N C E L