Before operating – Sharp KB-3401L User Manual

Page 12

Advertising
background image

1

beFOre OperatinG

before operating your new range make sure you read and

understand this operation manual completely.
• before the range can be used, follow these steps:

1

Plug in the range. The Microwave Drawer display will

show

WAIT

for 30 seconds, then

ENJOY

YOUR

RANGE

TOUCH

CLEAR

AND

TOUCH

CLOCK

.

2

Touch the Stop/Clear pad.

:

will appear.

3

Set clock.

Note:
• Please do not open or close the lower oven door for

30 seconds after plugged in.

tO set tHe ClOCk

1

Touch Timer/Clock pad and number 2.

2

Touch number pads for correct time of day and touch

Timer/Clock pad again.
This is a 12 hour clock. If you attempt to enter an incorrect

clock time,

ERROR

will appear in the display. Touch the

Stop/Clear pad and re-enter the time.
• If the electrical power supply to your range should

be interrupted, the display will intermittently show

WAIT

for 30 seconds, then

ENJOY

YOUR

RANGE

TOUCH

CLEAR

AND

TOUCH

CLOCK

after the power

is reinstated. If this occurs during cooking, the program will

be erased. The time of day will also be erased. Simply touch

Stop/Clear pad and reset the clock for the correct time of

day.
Note:
• The Microwave Drawer can be programmed with

the drawer open except for START/Minute Plus.

The Oven can be started with the door open except for

self-cleaning.

tiMers

Your Insight Range features two separate independent

Kitchen Timers.
The timer on the Oven side (left) of the control panel is

labeled Timer/Hold to Clear/3 Min Plus. The maximum

length of this timer is 9 hours, 99 minutes. You set this timer

in hours and minutes. For example, one hour 30 minutes

is entered as 130. 1:30 will appear. For times over one hour,

the time will count down in hours and minutes. When the

timer reaches 60 minutes, the timer will begin counting down

in minutes and seconds. To cancel Timer/Hold to Clear/

3 Min Plus, you must touch and hold the Timer/Hold to

Clear/3 Min Plus pad for 3 seconds.
The timer on the Microwave side (right) of the control panel

is labeled Timer/Clock. The maximum length of this timer

is 99 minutes, 99 seconds. This timer is set in minutes and

seconds. It will always count down in minutes and seconds.

To cancel this timer, simply touch Stop/Clear.
See page 21.

stOp/Clear

Touch the Stop/Clear pad to:

1

Erase if you make a mistake during programming.

2

Cancel timer on Microwave side.

3

Stop the Oven or Microwave Drawer temporarily during

timed cooking.

4

Return the time of day to the display.

5

Cancel a program during cooking, touch twice for timed

cooking.

Microwave

oven

Advertising