Sony VGN-FS Series - Manual (Page 65)

65 n N
Using Peripheral Devices
Connecting a Projector
You can connect a projector (for example, the Sony LCD projector) directly to your computer.
To connect a projector
1 Connect the power cord (1) of the projector into an AC outlet.
2 Plug the RGB signal cable (2) into the monitor (VGA) port (3) a on the computer.
3 Plug the audio cable (4) (not supplied) into the headphones jack (5) i .
4 Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).