Sony RDR-HXD1065 - Manual (Page 139)

139
Se
tti
n
gs an
d Adj
u
st
m
e
n
ts
Select “Technical Information” in “DTV
Settings,” and press ENTER.
Manufacturer Information
This information screen shows you the
current version of software installed in your
recorder.
1
Once the “Technical Information” menu
is displayed, select “Manufacturer
Information,” and press ENTER.
2
After viewing the information displayed,
press O RETURN to come back to the
“Technical Information” menu.
Signal Strength
This information screen shows the signal
strength of the broadcast you are watching.
1
Select “Signal Strength” in the
“Technical Information” and press
ENTER.
The “Signal Strength” display appears
with the selected channel on view in the
background.
The “Signal Strength” display coloured
bars correspondences are as follows:
2
Press PROG +/– to check the signal
strength of the other tuned channels.
3
After viewing the information displayed,
press O RETURN to come back to the
Technical Information menu.
Digital Software Upgrade
Periodically Sony will issue upgrades for the
software that was initially installed in your
recorder. These upgrades will automatically
be received and enabled. If desired, you can
disable this option as follows:
1
Select “Digital Software Upgrade” in the
“Technical Information” and press
ENTER.
The “Digital Software Upgrade” menu
option appears.
2
Press M/m to select “Off,” and press
ENTER.
b Notes
• Sony recommend that you always leave this
option set to “On.”
• To receive the upgrade, the unit must be powered
on. It will take up to 30 minutes to upgrade the
unit. The new software will be available once the
unit has been placed into standby, and then back
to normal operating mode.
Technical Information