Sony RDR-HXD1065 - Manual (Page 78)

78
b Note
To receive from the recorder a programme position
that can be received by either the set top box
receiver or the recorder, change the input source in
step 4.
If any programme positions are unused or
contain unwanted channels, you can hide
them.
1
Select “Editor” in the Menu Bar, and
press ENTER.
2
In the left column, select the
programme position you want to hide
or display using M/m.
3
Press the red button (“On/Off”).
The disabled positions will turn grey.
To show the disabled positions, press the
red button (“On/Off”) again.
b Notes
• You cannot record a programme position, if it is
not set in “Programme Setting” of “Settings and
Adjustments,” even if it is set to “On” in the
“Editor” in the Menu Bar.
• If you are using your set top box receiver to
receive programmes (connection B, page 17) and
are able to receive the same programme with both
the set top box and the recorder, change the
“Source” to receive the programme with the
recorder’s tuner.
Disabling programme positions