Connection to an audio system – Samsung V6700 User Manual
Page 19
ENG-
19
C
O N N E C T I O N S
Connection to an
Audio System
Connection to an Audio System (2 Channel Amplifier)
1
Using the audio cables, connect the (LINE)
AUDIO (red and white) OUT
jacks on the rear of
the DVD-VCR to the
AUDIO (red and white) IN
jacks of the
Amplifier.
2
Using the video signal cable(s), connect the
VIDEO, S-VIDEO or COMPONENT
OUT
jacks on
the rear of the DVD-VCR to the
VIDEO, S-VIDEO
or COMPONENT
IN
jack of your
TV as described
on pages 15 to 18.
3
T
urn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the
Amplifier to
select the
External input in order to hear sound
from the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
-
Please set the audio in the menu screen according to the Amplifier. (See pages 59 to 60)
- The position of jacks may vary depending on the Amplifier.
Please refer to your Amplifier's user manual .
- You can also connect the amplifier using AUDIO OUT (red and white) jacks from the DVD-VCR.
Red
Audio Cable
White
Red
2-channel
Stereo Amp.
White
000000_V6700_AFS_XAC1 3/8/07 8:44 PM Page 19