Connecting a power cord & auto setup – Samsung V6700 User Manual
Page 21
ENG-
21
C
O N N E C T I O N S
Y
ou must have the antenna/cable
connected for the Auto Clock to set
Connecting a Power Cord & Auto Setup
1
Y
our DVD-VCR's power cord should be plugged
into a standard 100V-240V, 50/60Hz wall outlet.
Avoid pressing any buttons on the remote control
or on the unit during Auto Setup. While your DVD-
VCR is running Auto Setup, “Auto” will blink.
When Auto Setup is complete, the current time
will be displayed on the front panel. If Auto Setup
fails to locate a channel to set the clock, you
should set the clock manually. (See pages 23 to
25.)
2
T
urn on the power by pressing the
POWER
button on the remote control or on the front
panel.
3
T
urn on your TV by pressing the
POWER button
on the TV remote control.
4
Press the input selector on your
TV remote until
the signal from the DVD-VCR appears.
000000_V6700_AFS_XAC1 3/9/07 12:05 PM Page 21