Samsung V6700 - Manual (Page 60)

ENG-60
D V D O P E R AT I O N S
Audio Options
Notes
There is no analog audio output when you
set DTS to on.
Notes
Even when PCM Down sampling is Of
f,
some discs will only output down sampled
audio through the digital outputs.
Digital Output
- PCM: Converts to
PCM(2CH) audio.
- Bitstream: Outputs Dolby
Digital via the digital
output. Select Bitstream
when connecting to a
Dolby Digital Decoder.
PCM Down Sampling : On
DTS
Select On when connecting
to a DTS Decoder.
- Off: Doesn’t output a digital
signal.
- On: Outputs DTS Bitstream
via digital output.
PCM Down Sampling : On
Dynamic Compression
- On: When the movie-
soundtracks are played at
low volume or from smaller
speakers, the system can
apply appropriate compression
to make low-level content more
intelligible and prevent dramatic
passages from getting too loud.
- Off: To select the standard
range.
PCM Down Sampling
- On: Select this when the
Amplifier connected to the
player is not 96KHz
compatible. In this case, the
96KHz signals will be down
converted to 48KHZ.
- Off: Select this when the
Amplifier connected to the
player is 96KHz compatible.
In this case, all signals will
be output without any
changes.
PCM Down Sampling : On
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
▼
- Dynamic compression restrains the
dynamic range of the sound, i.e. the
difference between the loud and
quiet passages of a DVD audio track.
This is useful when watching a DVD
late at night.
000000_V6700_AFS_XAC2 3/8/07 8:31 PM Page 60