Dv dubbing, Before dv dubbing, Preparing for dv dubbing – Sony RDR-HXD860 User Manual

Page 84

Advertising
background image

C:\2886042111HXD860CEK\01GB-

HXD860CEK\110OTH.fm

master page=left

specdef 20060621

RDR-HXD860

2-886-042-11(1)

84

DV Dubbing

Before DV Dubbing

This section explains dubbing with a digital
video camera via the DV IN jack on the front
panel. If you want to dub by way of the LINE
IN jacks, see “Recording from connected
equipment without a timer” on page 58.
The DV IN jack on this recorder conforms to
the i.LINK standard.
Follow the instructions in “Preparing for DV
dubbing,
” and then move on to the section on
dubbing. For more information about
i.LINK, see “About i.LINK” on page 114.

You can connect a digital video camera to the
DV IN jack on the recorder to record or edit
from a DV/Digital8 format tape. Operation is
straightforward because the recorder will fast
forward and rewind the tape for you – you do
not need to operate your digital video camera.
Do the following to start using the “DV Edit”
functions of this recorder.
See the instruction manual supplied with the
digital video camera as well before
connecting.

z

Hint

If you plan to do additional editing on a disc after
the initial dub, use the DV IN jack and record on a
DVD-RW/DVD-R (VR mode) or HDD.

b

Notes

• You cannot make a recording while DV dubbing.
• The DV IN jack is for input only. It will not

output signals.

• You cannot use the DV IN jack when:

– signal input to the DV IN jack on the front panel

or recorder operation cannot be performed
correctly when using a digital video camera
(see “About i.LINK” on page 114). Connect the
camera to the LINE IN jack and follow the
instructions of “Recording from connected
equipment without a timer” on page 58
.

– the input signal is not in DVC-SD format. Do

not connect a MICRO MV format digital video
camera even if it has an i.LINK jack.

– the images on the tape contain copy protection

signals, which limit recording.

• If you want to play the disc on other DVD

equipment, finalise the disc (page 34).

Hookups

1

Press HDD or DVD to select the
recording destination.

If you select DVD, insert a disc (see “1.
Inserting a Disc” on page 25)
.

2

Insert the source DV/Digital8 format
tape into your digital video camera.

For the recorder to record or edit, your
digital video camera must be set to video
playback mode.

Preparing for DV dubbing

DVD recorder

to DV IN

i.LINK cable (not supplied)

DV output

Digital video camera

: Signal flow

Advertising