Sony RDR-HXD860 - Manual (Page 93)

C:\2886042111HXD860CEK\01GB-
HXD860CEK\120ADJ.fm
master page=right
specdef 20060621
RDR-HXD860
2-886-042-11(1)
93
Set
ting
s an
d Adj
u
st
m
ent
s
2 Select the channel you want to move
using
M/m or the number buttons, then
press ENTER.
A tick
icon appears next to the selected
programme number and a Swap option
appears in the display.
Press the green or red button to view the
previous or next page.
3
Press M/m to select the programme
number you want your selected channel
to appear on.
4
Press the blue button to swap channel
position.
Your selected channel appears on the
programme number selected in step 3.
5
Repeat this procedure to move other
channels.
6 Once you have moved all channels as
desired, press O RETURN repeatedly
to return to the main menu.
Select “Technical Information” in “DTV
Settings,” and press ENTER.
Manufacturer Information
This information screen shows you the
current version of software installed in your
recorder.
1
Once the “Technical Information” menu
is displayed, select “Manufacturer
Information,” and press ENTER.
2 After viewing the information displayed,
press O RETURN to come back to the
“Technical Information” menu.
Signal Strength
This information screen shows the signal
strength of the broadcast you are watching.
1
Select “Signal Strength” in the
“Technical Information” and press
ENTER.
The “Signal Strength” display appears
with the selected channel on view in the
background.
The “Signal Strength” display coloured
bars correspondences are as follows:
2 Press PROG +/– to check the signal
strength of the other tuned channels.
3
After viewing the information displayed,
press O RETURN to come back to the
Technical Information menu.
Technical Information
,continued