Sennheiser SKP 500 - Manual (Page 15)

15
Working with the operating menu
By way of example of the “ TUNE ” menu, this section
describes how to use the operating menu.
After switching the transmitter on, the standard display is
shown on the display panel.
Getting into the operating menu
̈
Press the SET button to get from the standard display
into the operating menu. The last selected menu flashes
on the display.
Selecting a menu
̈
Press the
̆
/
̄
buttons to select a menu.
̈
Press the SET button to get into the setting mode of the
selected menu. The current setting that can be adjusted
flashes on the display.
Adjusting a setting
̈
Press the
̆
/
̄
buttons to adjust the setting.
By briefly pressing the
̆
/
̄
buttons, the display jumps
either forwards or backwards to the next setting. In the
“
CHAN ”, “ TUNE ” and “ NAME ” menu, the
̆
/
̄
buttons
feature a “fast search” function. If you hold down a
button, the display cycles continuously, allowing you to
get fast and easily to your desired setting.