Sennheiser SKP 500 - Manual (Page 4)

4
The SKP 500 G2 plug-on
transmitter
The SKP 500 G2 plug-on transmitter is part of the evolution
wireless series ew 500 G2. With this series, Sennheiser
offers high-quality state-of-the-art RF transmission systems
with a high level of operational reliability and ease of use.
Transmitters and receivers permit wireless transmission with
studio-quality sound. The excellent transmission reliability
of the ew 500 G2 series is based on the use of
y further optimized PLL synthesizer and microprocessor
technology,
y the
HDX noise reduction system,
y and the pilot tone squelch control.
The channel bank system
The plug-on transmitter is available in five UHF frequency
ranges with 1440 transmission frequencies per frequency
range. Please note: Frequency usage is different for each
country. Your Sennheiser agent will have all the necessary
details on the available legal frequencies for your area.
Range A: 518 to 554 MHz
Range B: 626 to 662 MHz
Range C: 740 to 776 MHz
Range D: 786 to 822 MHz
Range E: 830 to 866 MHz
The plug-on transmitter has nine channel banks with up to
20 switchable channels each.
Each of the channels in the channel banks “1” to “8” has
been factory-preset to a transmission frequency (see
enclosed frequency table). These transmission frequencies
cannot be changed but have been preset so that e.g.
country-specific regulations on frequency usage are taken
into account.
The channel bank “U” (user bank) allows you to store your
selection out of 1440 transmission frequencies that are
freely selectable within the preset frequency range.
channel bank 1...8
channel bank U
channel 20 preset frequency
channel 1
channel 2
preset frequency
preset frequency
channel 20
channel 1
channel 2
freely selectable frequency
freely selectable frequency
freely selectable frequency