Siemens I-SURF - Manual (Page 68)

Appendix
62
A2: CAPI 2.0 Error Messages
Number (hex) Description
0x1001 Error in API_REGISTER
0x1002 Invalid application ID
0x1003 Invalid message
0x1004 Invalid command or subcommand
0x1005 Queue full
0x1006 Queue empty
0x1007 Queue overflow
0x1008 Deinstallation error
0x2001 Invalid controller
0x2002 Invalid PLCI
0x2003 Invalid NCCI
0x2004 Invalid type
0x3101 Error in B channel
0x3102 Error in info mask
0x3103 Error in MSN service mask
0x3104 Error in SI service mask
0x3105 Invalid protocol layer 2
0x3106 Invalid DLPD
0x3107 Invalid protocol layer 2
0x3108 Invalid NCPD
0x3109 Invalid NCPIs
0x3201 General controller error
0x3202 LISTEN_REQs not unique
0x3203 Unsupported function
0x3204 PLCI not active
0x3205 NCCI not active
0x3206 Protocol l2 not supported
0x3207 Cannot select protocol I2 now
0x3208 Protocol l3 not supported
0x3209 Cannot select protocol I3 now
0x320a Invalid DLPD parameter
0x320b Invalid NCPD parameter
0x320c Invalid NCPI parameter
0x320d Data length not supported
0x3301 Setup error D channel, layer 1
0x3302 Setup error D channel, layer 2
0x3303 Setup error B channel, layer 1
0x3304 Setup error B channel, layer 2
0x3305 Turned off D channel, layer 1
0x3306 Turned off D channel, layer 2
0x3307 Turned off D channel, layer 3
0x3308 Turned off B channel, layer 1
0x3309 Turned off B channel, layer 2
0x330a Turned off B channel, layer 3
0x330b Restored B channel, layer 2
0x330c Restored B channel, layer 3
0x34xx Connection ended/terminated