Installing the speakers on a wall – Sony DAV-IS50 User Manual

Page 13

Advertising
background image

13

US

Getting Star

ted

Note on handling the subwoofer

• Do not place your hand into the slit of the subwoofer

when lifting it. The speaker driver may be damaged.
When lifting, hold the bottom of the subwoofer.

• Do not hold the EZW-T100 slot when lifting the

subwoofer.

• Do not push the top of the subwoofer where the

speaker unit is installed.

Installing the speakers on a wall

Caution

• Contact a screw shop or installer regarding the wall material or screws to be used.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach

the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.

• Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or

improper screw installation, natural calamity, etc.

1

Prepare screws (not supplied) that are suitable for the holes of the bracket.

2

Secure the bracket to the wall using hole 1.

Tip

• To prevent the speaker from rotating, use the hole 2, too.

Slits

Subwoofer

Speaker unit

EZW-T100 slot

1

3

4

2

continued

Advertising