Sony DAV-IS50 - Manual (Page 66)

66 US
To control the system from the
S-AIR receiver
You can control the system from the S-AIR
receiver by using the following buttons.
For details, refer to the operating instructions of
the S-AIR receiver.
Enjoying the S-AIR receiver
while the S-AIR main unit is in
standby mode
For the S-AIR receiver (not supplied)
You can enjoy the S-AIR receiver while the
S-AIR main unit is in standby mode by setting
“S-AIR STBY” to “ON”.
1
Press SYSTEM MENU.
2
Press X/x repeatedly until “S-AIR
STBY” appears in the front panel
display, then press
or c.
3
Press X/x to select the desired setting.
• “ON”: You can enjoy the S-AIR receiver
while the S-AIR main unit is in standby
mode or turned on.
• “OFF”: You cannot enjoy the S-AIR
receiver while the S-AIR main unit is in
standby mode.
4
Press .
The setting is made.
5
Press SYSTEM MENU.
The system menu turns off.
Note
• When you set “S-AIR STBY” to “ON,” the power
consumption during the standby mode increases.
• When you turn the system off while “S-AIR STBY”
is set to “ON,” “S-AIR” flashes (when sound
transmission between the S-AIR main unit and S-AIR
receiver is not established), or lights up (when sound
transmission between the S-AIR main unit and S-AIR
receiver is established) in the front panel display.
• When the wireless transmitter is not inserted in the
S-AIR main unit, you cannot set “S-AIR STBY”.
• “S-AIR STBY” is set to “OFF” automatically when
the wireless transmitter is removed from the S-AIR
main unit.
• When you turn the system off while “S-AIR STBY”
is set to “ON”, you cannot use any buttons other than
[
/1 button.
Tip
• When there is no disc in the S-AIR main unit and
“S-AIR” lights up in the front panel display, you can
load a disc into the S-AIR main unit and enjoy music
by the S-AIR receiver.
Identifying the S-AIR main
unit with a specific S-AIR sub
unit (Pairing operation)
For the surround amplifier (not supplied)
For the S-AIR receiver (not supplied)
It is easy to set the same ID for the S-AIR main
unit and an S-AIR sub unit, such as a surround
amplifier or S-AIR receiver, to establish sound
transmission. However, neighbors may also
receive your system’s sound if IDs are the same,
or you may receive the sound from neighbors.
To prevent this, you can identify the S-AIR main
unit with a specific S-AIR sub unit by
performing the pairing operation.
Press Operation
H , X, x,
. />
Share the same operations on the
remote and control unit.
S-AIR CH Change the function of the system.