Sony DAV-IS50 - Manual (Page 88)

88 US
Returning the system
parameters, such as preset
stations, to the default
settings
1
Turn off the power.
2
Press and hold "/1 on the control unit
about 5 seconds.
“MEMORY CLR” and “PUSH POWER”
appear alternately in the front panel display
about 10 seconds.
3
Press "/1.
“CLEARING” appears in the front panel
display and the default settings are returned.
After “CLEARED!” appears, the system is
turned off.
Note
• In step 3, if you do not press "/1 or press any buttons
other than "/1 on the control unit, the system turns
on. The setting is not made.
• When you turn on the system after returning to the
default settings, wait about 20 seconds before turning
on the power by pressing "/1.
Returning the [SETUP]
settings to the default
1
Press FUNCTION repeatedly until
“DVD” appears in the front panel
display.
2
Press DISPLAY when the system is
in stop mode.
The Control Menu display appears on the
TV screen.
3
Press X/x to select [SETUP],
then press .
The options for [SETUP] appear.
4
Press X/x to select [CUSTOM], then
press .
The Setup Display appears.
5
Press X/x to select [SYSTEM SETUP],
then press .
The options for [SYSTEM SETUP] appear.
6
Press X/x to select [RESET], then
press .
7
Press C/c to select [YES].
You can also quit the process and return to
the Control Menu display by selecting [NO]
here.
8
Press .
All the settings explained on pages 80 to 87
return to the default settings. Do not press
[/1
while resetting the system as it takes a
few seconds to complete.
Note
• When you turn the system on after resetting and no
disc is in the control unit, the guide message appears
on the TV screen. To perform the Quick Setup
(page 25), press
, to return to normal screen, press
CLEAR.
• The [MODE (MUSIC, IMAGE)], [INTERVAL] and
[EFFECT] settings are also return to the default
settings.
Returning to the Default
Settings
"/1