Sony JAX-S8 - Manual (Page 10)

10
En
ADJUSTMENTS BEFORE OPERATIONS
Power
Turning the unit on
Press POWER 6STANDBY/ON (POWER on the remote).
Pressing TAPE A/B, TUNER/BAND, VIDEO (MD) or CD also
turns the unit on (Direct Play Function.)
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
Volume
Turn VOLUME (Press VOLUME +, - on the remote).
Adjust from 0 (minimum) to 30 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby:
If the unit is turned off with the volume set to 17 or more, it is
automatically set to 16 the next time the unit is turned on.
POWER
STANDBY / ON
TAPE A/B,
TUNER/BAND,
VIDEO (MD),
CD VOLUME
POWER
DISPLAY
ENTER
MULTI JOG
MODE
SPECTRUM
CLOCK/
TIMER/SET
DISPLAY
ENTER
VOLUME
+,– SHIFT
Spectrum analyzer display
You can change the spectrum analyzer display.
1 Press MODE repeatedly until “SPECTRUM”
appears in the display when the unit is turned on
and then press ENTER within 6 seconds.
2 Turn MULTI JOG to select one of the three
spectrum analyzer displays (PATTERN 1, 2 and
3
), then press ENTER.
On the remote, press SHIFT+SPECTRUM repeatedly.