Sony JAX-S8 - Manual (Page 11)

11
En
Dimmer
Adjusts the brightness of the display.
1 Press MODE repeatedly until “DIMMER” appears
in the display when the unit is turned on and then
press ENTER.
2 Turn MULTI JOG to select one of the four dimmer
modes “DIMMER 0” to “DIMMER 3” and then
press ENTER.
“DIMMER 0” is the brightest and “DIMMER 3” is
the dimmest.
If there is no MULTI JOG or button operation within 6
seconds, the setting is canceled.
To cancel the dimmer
Repeat the above and select “DIMMER 0” in step 2 .
Setting the clock
Use the remote.
1 Press CLOCK/TIMER/SET.
Go to step 3 when the time appears and the ‘hour’ flashes.
2 Press r or t repeatedly until “CLOCK”
appears in the display and then press ENTER.
3 Press r or t repeatedly to set the hour
and then press ENTER.
4 Press r or t repeatedly to set the minute
and then press ENTER.
The time display stops flashing and the clock starts from
00 seconds.
•MULTI JOG is also available in place of r or t.
To display the time
Press DISPLAY. The time will be displayed for 6 seconds.
Tip:
“AM 12:00” indicates midnight and “PM 12:00” noon.
If “- -:- -” appears when the unit is turned off
There has been a power interruption. Re-set the clock.
Display mode (when off)
You can select what is displayed when the unit is off.
While the unit is off, press DISPLAY repeatedly to select one
of three display modes, DEMO, CLOCK or ECO, as explained
below:
DEMO mode
You can enjoy DEMO in the display when the unit is turned
off.
Press DISPLAY until DEMO is displayed when the unit is
turned off.
Clock mode
Displays the time while the unit is off.
Press DISPLAY until the time is displayed when the unit is
turned off.
ECO mode
Saves power while the unit is off.
Press DISPLAY until the screen goes blank when the unit is
turned off.