Displaying the “menu” screen – Sony NSP-100 User Manual
Page 11
NSP 100
Op
er
at
io
n
Displaying the “MENU” Screen
11
9
When all of the required items have been set, press
the MENU button.
To enable the new network settings, a message
prompt appears, asking if you want to reset the unit.
10
Select “Yes” to reset immediately or “No” to reset
later, then press the ENTER button.
The initial screen appears after a reset (for “Yes”) or
immediately (for “No”).
To change the design of the initial screen
Use the BZNP-100 Software.
For details, refer to the Help information for the BZNP-
100 Software.
To skip displaying the initial screen
Use the BZNP-100 Software.
For details, refer to the Help information for the BZNP-
100 Software.
Displaying the “MENU”
Screen
In the initial screen, press the MENU button.
The “MENU” screen appears.
In the “MENU” screen, you can select the next screen to
be displayed. The screens to be displayed are shown in
the following table.
To exit the MENU screen
Press the MENU button.
Screen to be selected Section with details
1. “Playlist” screen
“Playing a Playlist” (page 12)
2. “Video” screen
“Playing a Movie File” (page 13)
3. “Graphic” screen
“Displaying a Still Image File”
(page 13)
4. “Delete Files” screen
“Deleting Unwanted Playlists and
Files” (page 14)
0. “Setup” screen