Sony NSP-100 - Manual (Page 12)

NSP 100
Op
er
at
io
n
Playing a Playlist
12
Playing a Playlist
In the “Playlist” screen, you can select a desired playlist,
and play it.
You can also make the following specifications.
• Automatic playback at power on
Playlist that starts playback automatically when the
unit is powered on
• PLAY button “One Touch” playback
Playlist that starts playback if you press the PLAY
button in the initial screen
For details of these settings, see “Carrying out “Playlist
Mode Setup”” (page 18).
To select a desired playlist and play it, use the following
procedure.
1
In the “MENU” screen, carry out any of the
following.
• Press numeric button 1.
• Using the v and V buttons, select “1. Playlist,”
and press the ENTER button.
The “Playlist” screen appears.
1) The new playlist indication shows playlists that have been added
since the last time the playlist display was shown.
2) This is a display for example only. If this display were actually
present, playback would have started when the unit was powered on.
2
Using the v and V buttons, select the playlist you
want to play.
3
Press the ENTER button or PLAY button.
This starts playback of the desired playlist.
When playback ends, the “Playlist” screen
reappears.
To stop during playback
Press the STOP button.
Playback stops, and the “playlist” screen appears.
Displaying the Titles of the Events
During Playlist Playback
Press the LIST button.
The titles of the events constituting the playlist being
played appear.
To return to the playlist playback screen
Press the LIST button.
To play from the beginning of a desired event
Using the v and V buttons, select the event, then press
the ENTER button or PLAY button.
1
2
3
1 New playlist indication
1)
2 Automatic playback at power on indication
2)
3 PLAY button “One Touch” playback indication
Still image file
indication
Movie file
indication