Sony CDX-CA660X - Manual (Page 11)

11
Labeling a CD
— Disc Memo
(For a CD unit with the CUSTOM FILE
function)
You can label each disc with a custom name
(Disc Memo). You can enter up to 8 characters
for a disc. If you label a CD, you can locate the
disc by name (page 12).
Caution
Do not use the CUSTOM FILE feature while
driving, or perform any other function which
could divert your attention from the road.
1
Start playing the disc you want to label.
2
Press (MENU), then press either side of
(DISC/PRESET) repeatedly until
“NAMEEDIT” appears.
3
Press (ENTER).
The unit will repeat the disc during the
labeling procedure.
4
Enter the characters.
1
Press the (+)* 1 side of (DISC/PRESET)
repeatedly to select the desired
character.
A t B t C … t 0 t 1 t 2 …
t + t – t
* … t _* 2 t A
* 1 For reverse order, press the (–) side of
(DISC/PRESET).
* 2 (blank space)
2 Press the (+) side of (SEEK) after
locating the desired character.
If you press the (–) side of (SEEK), you
can move back to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
5
To return to normal CD play mode, press
(ENTER).
Tips
• Simply overwrite or enter “_” to correct or erase
a name.
• There is another way to start labeling a CD: Press
(LIST) for 2 seconds instead of performing steps
2 and 3. You can also complete the operation by
pressing (LIST) for 2 seconds instead of step 5.
• You can label CDs on a unit without the CUSTOM
FILE function if that unit is connected along with
a CD unit that has the function. The Disc Memo
will be stored in the memory of the CD unit with
the CUSTOM FILE function.
Note
REP-1/shuffle play is suspended until the Name Edit
is complete.
Viewing the Disc Memo
As a display item, the Disc Memo always takes
priority over any original CD TEXT
information.
To Press
View (DSPL) during CD/CD
TEXT disc playback
Tip
To find out about other items that can be
displayed, see page 10.
Erasing the Disc Memo
1
Press (SOURCE) repeatedly to select
“CD.”
2
Press (MODE) repeatedly to select the CD
unit storing the Disc Memo.
3
Press (MENU), then press either side of
(DISC/PRESET) repeatedly until
“NAME DEL” appears.
4
Press (ENTER).
The stored names will appear in order from
the earliest entered.
5
Press either side of (DISC/PRESET)
repeatedly to select the disc name you
want to erase.
The stored names will appear from the
earliest ones entered.
6
Press (ENTER) for 2 seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
continue to next page t