Sony BDP-S760 - Manual (Page 29)

29
Ho
oku
p
s a
nd
Set
tings
Step 5: Connecting the
Mains Lead
After all of the other connections are
complete, connect the supplied mains lead to
the AC IN terminal of the player. Then plug
the player and TV mains leads (AC power
cords) into the mains.
Step 6: Preparing the
Remote
You can control the player using the supplied
remote. Insert two R6 (size AA) batteries by
matching the 3 and # ends on the batteries
to the markings inside the battery
compartment. When using the remote, point
it at the remote sensor
on the player
(page 12).
b
• Use the batteries correctly to avoid possible
leakage and corrosion. Should leakage occur, do
not touch the liquid with bare hands. Observe the
following:
– Do not use a new battery with an old battery, or
batteries of different manufacturers.
– Do not attempt to recharge the batteries.
– If you do not intend to use the remote for an
extended period of time, remove the batteries.
– If battery leakage occurs, wipe out any liquid
inside the battery compartment, and insert new
batteries.
• Do not expose the remote sensor (marked on
the front panel) to strong light, such as direct
sunlight or a lighting apparatus. The player may
not respond to the remote.
to mains
to AC IN
1
2
,continued