Sony BDP-S760 - Manual (Page 64)

64
6
Select the manual registration
method, and press ENTER.
• When you select “(WPS) PIN method,”
the PIN code of this player appears.
Register the code to the wireless LAN
router (access point) within 2 minutes
after pressing “Start,” and go to step 12.
For details on the registration, refer to
the instruction manual supplied with
the wireless LAN router (access point).
7
Select the security, and press ENTER.
The display for entering WEP or WPA
key appears.
• If you select “None,” go to step 10.
8
Press ENTER to input the WEP or WPA
key.
To enter characters, see page 65.
b
Make sure the WEP or WPA key is correctly
entered before you proceed to step 9. Once you
press
, in step 9, you cannot check the
characters on the screen.
9
Press ,.
b
The WEP or WPA key is displayed as 8
asterisks no matter how many characters you
enter.
10
Select the IP address setting method,
and press ENTER.
• When you select “Manual,” set the
following items:
– IP Address
– Subnet Mask
– Default Gateway
The display for the DNS server setting
appears after you set the items.
Enter the DNS server address manually,
and go to step 12.
11
Select the DNS server setting method,
and press ENTER.
• When you select “Manual,” enter the
address in the “Primary DNS” row.
12
Select “Do not use,” and press
ENTER.
If your Internet service provider has a
specific proxy server setting, select
“Use,” and fill the “Proxy Server” and
“Port Number” rows. To enter
characters, see page 65.
Manual
registration To make all the settings
manually, select this
and enter SSID. To
enter characters, see
page 65.
(WPS) PIN
method Select this when you
connect the player to a
Wi-Fi Protected Setup-
compatible wireless
LAN router (access
point) and use a PIN
code.
Auto
Acquisition Select this when DHCP
(Dynamic Host
Configuration Protocol)
server settings are
available from your
Internet service
provider. The network
settings necessary for
the player will be
assigned automatically.
Manual Set the IP address
manually according to
your network
environment.
Auto Acquires the DNS
server address
automatically.
Manual Enter the DNS server
address manually.