Sony BDP-S760 - Manual (Page 30)

30
You can control the volume, input source,
and power switch of your Sony TV with the
supplied remote.
b
When you replace the batteries of the remote, the
code number may be reset to the default setting. Set
the appropriate code number again.
Available buttons
Depending on the connected unit, you may not
be able to control your TV with some or all of
the buttons (TV [/1, t, or TV 2 +/–).
To control other TVs with the remote
You can control the volume, input source,
and power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.
b
If you enter a new code number, the code number
previously entered will be erased.
1
While holding down TV [/1, enter the
TV’s manufacturer code using the
number buttons.
For instance, to enter “09,” press “0” then
“9.”
Code numbers of controllable TVs
If more than one code number is listed,
try entering them one at a time until you
find the one that works with your TV.
2
Release TV [/1.
Controlling TVs with the
remote
Buttons Operations
TV [/1 Turns your TV on or off.
t (input select) Switches your TV’s input
source between the TV
and other input sources.
TV 2 (TV
volume) +/– Adjusts the volume of
your TV.
Number
buttons
TV [/1
TV 2 +/–
t
Manufacturer Code number
Sony 01 (default)
Grundig 11
Hitachi 24
ITT 15, 16
JVC 33
LG/Goldstar 76
Loewe 45
Nokia 15, 16, 69, 73
Panasonic 17, 49
Philips 06, 07, 08, 72
Saba 12, 13, 74
Samsung 22, 23, 71
Sanyo 25
Sharp 29
Telefunken 36
Thomson 43, 75
Toshiba 38