Sony BDP-S760 - Manual (Page 23)

23
Ho
oku
p
s a
nd
Set
tings
z
Check the following settings:
– “Audio Output Priority” is set to “HDMI” in the
“Audio Settings” setup (page 54).
– “Audio (HDMI)” is set to “Auto” in the “Audio
Settings” setup (page 57).
b
Not all HDMI-compatible AV amplifiers
(receivers) accept 8ch Linear PCM signals. Refer as
well to instruction manual supplied with the
connected AV amplifier (receiver).
If your AV amplifier (receiver) has a Dolby
*1
Digital, Dolby Pro Logic, or DTS
*2
decoder and
a digital input jack, you can enjoy Dolby Digital (5.1ch), Dolby Pro Logic (4.0ch), or DTS
(5.1ch) surround effects.
1
Connect the digital jack of the player
and your AV amplifier (receiver).
2
Set “Audio Output Priority” to
“Coaxial/Optical” in the “Audio
Settings” setup (page 54).
3
Make the appropriate settings in
“Dolby Digital” and “DTS” under the
“Audio Settings” setup (page 57).
Otherwise, no sound or a loud noise will
come from your speakers.
Connecting to digital jacks (OPTICAL/COAXIAL)
AV amplifier (receiver)
Coaxial digital cable
(not supplied)
Blu-ray Disc/DVD player
Optical digital cable
(not supplied)
or
: Signal flow
,continued