Sony VAIO VGN-AW User Manual
Page 51
51
Using Your VAIO Computer >
Using the TV Function
To connect in STB mode
1
Connect one end of a TV coaxial cable (1) to your cable service access (wall outlet) (2). Connect the other end to the
VHF/UHF input port on the back panel of your set-top box (STB) (3).
2
Connect a second TV coaxial cable (4) to the VHF/UHF output port on the set-top box (STB) (3). Connect the other end
to the single-connection end of a splitter device (5).
3
Connect a third TV coaxial cable (6) to the double-connection end of the splitter device (5).
4
Connect the other end to the MMCX antenna converter cable (7).
5
Connect the MMCX antenna converter cable (7) to the VHF/UHF input port (8) on the computer until it clicks into place.
6
Connect a fourth TV coaxial cable (9) to the double-connection end of the splitter device (5). Connect the other end to the
VHF/UHF input port (10) on your TV monitor or display.