Sony CDP-XA20ES - Manual (Page 4)

Getting Started
4 EN
Unpacking
Check that you received the following items:
• Audio connecting cord (1)
• Remote commander (remote) (1)
• Sony SUM-3 (NS) batteries (2)
• Stabilizer (1)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two size AA (R6) batteries by matching the +
and – on the batteries. When using the remote, point it
at the remote sensor
❢ on the player.
Hooking Up the System
Overview
This section describes how to hook up the CD player to
an amplifier. Be sure to turn off the power of each
component before making the connections.
When to replace batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the player,
replace all the batteries with new ones.
Notes
• Do not leave the remote near an extremely hot or humid
place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don’t use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
Hookups
♦ When making analog hookups
When connecting an audio cord, be sure to match the
color-coded cord to the appropriate jacks on the
components: Red (right) to Red and White (left) to
White. Be sure to make connections firmly to avoid
hum and noise.
What cords will I need?
♦ When making analog hookups
•
Audio cord (supplied) (1)
White
(L)
Red
(R)
White
(L)
Red
(R)
♦ When making digital hookups
•
Optical cable POC-15 (not supplied)
•
Coaxial cable (not supplied)
To an AC outlet
DIGITAL OUT
COAXIAL
LINE OUT
VARIABLE
DIGITAL OUT
OPTICAL
To an AC outlet
Amplifier
: Signal flow
CD player
LINE OUT
FIXED
CD