Sony CDP-XA20ES - Manual (Page 6)

Basic Operations
6 EN
Turn on the amplifier and select the CD player position.
Press POWER to turn on the player.
Press ➣ OPEN/CLOSE, and place a CD on the tray.
Press ✬.
The disc tray closes and the player plays all the tracks once
(Continuous Play).
Adjust the volume on the amplifier.
Playing a CD
1
2 • See pages 4 – 5 for the hookup
information.
If you turn on the player with
a CD in the tray
You can start playing
automatically from the
beginning of the CD. If you
connect a commercially
available timer, you can start
playing the CD at any time
you want.
If “– – – – –” appears in the
display
Place the supplied stabilizer
on the CD.
If you do not, this indication
appears.
Note
In Step 3, do not place two or
more CDs at the same time.
If you do so, you may damage
the discs and/or the player.
2 3 4
Connect the
headphones.*
Adjust the
headphones volume.*
4
3
With the label side up
Place the supplied stabilizer on the
CD with the hole facing down.
* Except for UK model
(The output level from the LINE OUT VARIABLE jacks will also
change if you turn the LINE OUT/PHONE LEVEL control.)
CHECK CLEAR FADER
OPEN/CLOSE
REPEAT TIME FADE
EDIT/ PUSH ENTER
AMS
TIME PHONE LEVEL
LINE OUT
0 10
PHONES
POWER
PLAY MODE
BEARCH PEAK SPACE AUTO