Using windows xp – Sharp PG-M25X User Manual
Page 11
Installation
-11
Using Windows XP
11
Insert the Wireless LAN PC Card into the PC Card slot.
CAUTION
• Do not insert the Wireless LAN PC Card until the computer is fully loaded.
• Make sure to insert the wireless LAN PC Card with the LINK indicator facing
upwards. If you force the card into the slot in the wrong direction, it may damage
the connector and communication will not be possible.
The location of the PC card slot may vary depending on your computer. For details,
refer to the documentation that comes with your computer.
12
Follow the instructions displayed on the screen below.
When the “Hardware Installation” dialog is displayed, click “Continue Anyway”.
■ Check if the “Configuration Utility for Wireless LAN” is displayed on the
task tray
• If this icon is not displayed on the status bar, the driver is not properly installed.
Reinstalling the ‘Sharp AN-WC11B Wireless LAN PC Card’ driver
to uninstall and then reinstall the driver.
When the LINK indicator on the Wireless LAN PC Card is lit:
1Double click the wireless network connection icon (
) in the status bar.
2Select “SHARP_PRJ” and click “Connect”.
Make sure that the icon is green (
). The LINK indicator lights up.
Configuration Utility for Wireless LAN icon
(The color of the icon varies according to the signal status.)