Sharp PG-M25X User Manual
Page 9
Installation
-9
Using Windows 98/Me
11
Insert the Wireless LAN PC Card into the PC Card slot.
CAUTION
• Do not insert the Wireless LAN PC Card until the computer is fully loaded.
• Make sure to insert the Wireless LAN PC Card with the LINK indicator facing
upwards. If you force the card into the slot in the wrong direction, it may damage
the connector and communication will not be possible.
The location of the PC card slot may vary depending on your computer. For details,
refer to the documentation that comes with your computer.
12
Wait until the screen below is displayed and the Wireless LAN PC Card
driver is installed
■ Check if the “Configuration Utility for Wireless LAN” is displayed on the
task tray
• If this icon is not displayed on the status bar, the driver is not properly installed.
See “
Reinstalling the ‘Sharp AN-WC11B Wireless LAN PC Card’ driver
to uninstall and then reinstall the driver.
13
From the “Start” menu, click “Settings”, “Control Panel”, and then double
click “PC Card”.
14
Check if there is a “Sharp AN-WC11B Wireless LAN PC Card” in one of
the sockets.
If “Sharp AN-WC11B Wireless LAN PC Card” is displayed, the card has been
correctly detected.
15
Double click “Control Panel”, and then click “System”.
16
Click the “Device Manager” tab, and then double click “Network adapters”.
• If the “Sharp AN-WC11B Wireless LAN PC Card” is displayed, installation is
completed.
• If there is a yellow “ ? ” or “ ! ” mark next to the “Sharp AN-WC11B Wireless LAN
PC Card” icon, then installation has failed. Refer to “
Configuration Utility for Wireless LAN icon
(The color of the icon varies according to the signal status.)