Sharp PG-M25X - Manual (Page 36)

-36
■ “Projector” tab
• Select the destination projector. Up to a maximum of 4 units can be selected
simultaneously.
• The projectors recognized by the computer via a wireless LAN are displayed in a
list. Images cannot be sent to projectors not displayed here.
• Check the check box next to the projector you want to transmit to.
“Projector Name” The name set on the projector.
“IP Address” The IP address of the projector.
“ MAC Address ” The MAC address of the projector.
“Scan Projector” Searches for projectors connected via a wireless LAN
and updates the list.
Make sure that the “Projector Name”, “IP Address” and “MAC Address” on the
screen are same as those on the projector setting screen. If not, the data will be
transmitted to other projectors besides the projector you want to transmit to.
■ “Quality” tab