SMC Networks SMC3056EM - Manual (Page 10)

10
Chapter 3 Installing The EZ Modem
3.1 Checking Your Components
Unpack your EZ Modem and make sure you have the following
items:
1. The EZ Modem
2. A modular telephone cable to connect your EZ Modem to
the telephone line
3. Communication software (included driver and manual)
When you open your package, make sure all of the above items
are included and not damaged. If you see that any components
are damaged, please notify your dealer immediately.
3.2 What Else You Need
To complete your data communication system, you will need the
following items:
1. Other communication software, if needed
2. An active telephone line and telephone set (if you need
to use a telephone with your modem)
3.3 Connecting To The Telephone Line
Use the following procedure to connect your EZ Modem to the
telephone line:
1. Locate an available RJ-11 modular jack telephone outlet.
2. Take one end of the modular cord supplied with the EZ
Modem and plug it into the LINE modular jack on the back of
the EZ Modem.
3. Plug the other end of the modular cord into the modular jack