Sharp AL-1610 - Manual (Page 33)

40
GENERAL INFORMA
TION
SUPPLIES
Types and sizes of copy paper
Size Weight Capacity Special paper
(21 lb. bond paper)
Paper tray 5-1/2" x 8-1/2" 15 lbs. to 21 lbs. 250 sheets
to 11" x 17"
Bypass tray Ordinary paper: 15 lbs. to 34 lbs.* 100 sheets Transparency film,
5-1/2" x 8-1/2" (Ordinary paper) labels, envelopes**
to 11" x 17"
Envelopes:
Commercial 10
(4-1/8" x 9-1/2")
International DL
(110 x 220 mm)
International C5
(162 x 229 mm)
* For paper weighing from 28 to 34 lbs., 8-1/2" x 11" is the maximum size
that can be fed through the bypass tray.
** Do not use envelopes that have metal clasps, plastic snappers, string
closures, windows, linings, self-adhesive patches or synthetic materials.
These will cause physical damage to the copier.
● For best results, use only paper recommended by SHARP.
● Special papers except envelopes must be fed one sheet at a time through
the bypass tray. Up to 10 envelopes can be set at one time.
Supplies
Supply part numbers
When ordering supplies, please use the correct part numbers as listed below.
Be sure to use only genuine SHARP parts and supplies.
Supply list
Supply Part number Usable life
TD cartridge AL-160TD Approx. 15,000 sheets*
Drum cartridge AL-160DR Approx. 30,000 sheets
*Based on copying onto letter-type paper at 6% toned area
(The life of the TD cartridge which has been included in the copier at the factory is approximately 5,000 sheets.)