Part names and functions – Sharp AL-1610 User Manual
Page 8
6
GETTING ST
AR
TED
Operation
panel
PART NAMES AND FUNCTIONS
Part names and functions
q
AUTO/MANUAL/PHOTO (
/
/
) key
and indicators (p. 15)
Use to sequentially select the exposure modes: AUTO,
MANUAL (
), or PHOTO (
).
w
Alarm indicators
: Paper required indicator (p.13)
: Misfeed indicator (p.28)
: TD cartridge replacement required indicator
(p.24)
: Drum replacement required indicator (p.26)
e
Paper feed location/misfeed location indica-
tors (p. 28)
The selected paper feed location is shown by a lit
indicator (
).
The misfeed location indicator (
) blinks when a
misfeed has occurred.
r
INTERRUPT key and indicator (p. 21)
Interrupts a copy run.
t
Copy quantity display
Displays the specified copy quantity during the ready
condition and displays the copy countdown as copies
are made. Also see items
!3 and !5.
y
CLEAR ALL (
) key
Clears all selected settings and returns the copier to the
initial settings.
u
POWER SAVE (
) indicator (p. 34)
Lights up when the copier is in the preheat mode.
i
Light (
) and dark (
) keys and indicators
(p. 15)
Use to adjust the MANUAL (
) or PHOTO (
)
exposure level.
o
TRAY SELECT (
) key (p. 15)
Use to manually select a paper tray.
! 0
PRESET RATIO selector keys and indicators
(p. 17)
Use to sequentially select preset reduction/enlargement
copy ratios: 50%, 64%, 77%, 95%, 100%, 121%, 129%,
141%, 200%.
! 1
ZOOM indicator (p.17)
Lights up when a zoom ratio is set.
GETTING ST
AR
TED