To remove partitions – Sun Microsystems StreamLine SL8500 User Manual
Page 78
Configuring Library Partitions
38 StreamLine™ SL8500 Modular Library System User's Guide • March 2007
Revision K • 96154
■
Select Cancel to cancel the updates and return to
Step 2
.
4. All library hosts must now be configured to activate these updates. See the ACSLS
and HSC documentation for details.
▼
To Remove Partitions
Note –
It is recommended that you quiesce the library to all hosts before beginning this
procedure. See the ACSLS and HSC documentation for details.
1. Select Tools > Partitions.
2. Select Unassigned for each rail you want to remove from a partition, or select
Disable ALL Partitions to remove all rails from all partitions.
■
Select Apply to apply the updates and continue to
Step 3
.
■
Select Refresh to cancel the updates and restore the original screen settings.
3. A dialog displays, “This operation will take the library offline temporarily. Do you
wish to continue?”
■
Select OK to make the updates. The library goes offline and all host connections are
dropped while the updates are made.
■
Select Cancel to cancel the updates and return to
Step 2
.
4. All library hosts must now be configured to activate these updates. See the ACSLS
and HSC documentation for details.