Sun Microsystems StreamLine SL8500 - Manual (Page 91)

Automated Mode of Operation
96154 • Revision K Chapter 4 Library Operation 51
When a CAP is in automated mode, it is unlocked unless it is currently being used to
import cartridges.
▼ To import cartridges using the CAP
1. Make sure that the CAP is unlocked (see TABLE 1-4 on page 15 for a description of
CAP indicators).
2. Press the appropriate CAP Unlocked button (CAP A or CAP B) on the operator key
pad.
Note – This action causes the CAP to rotate outward and present the magazines to load
cartridges.
3. With the CAP open, you may enter the cartridges into the magazines while the
magazines are in the CAP; or you may remove the magazines from the CAP, insert
cartridges into the magazines, and then replace the cartridge-filled magazines into
the CAP.
FIGURE 4-4 Placement of Cartridges with the Magazine Outside the CAP
1. CAP
2. CAP magazine removed 3. Magazine slots
4. Inserting cartridge with hub down
1
4
2
3
L203_474