Sony 2-661-374-11(4) - Manual (Page 13)

T
uner
13 GB
5
Press ENTER.
The track(s) is(are) programmed.
The program step number appears in the
display.
6
To program additional discs or tracks.
7
Press N.
Program Play starts.
Other operations
Tips
• The program you made remains in the system’s
memory even after it has been played back. Press N
to play back the same program again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number which
exceeds 20.
– the total playing time has exceeded 100 minutes.
– you have programmed an MP3 audio track.
You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then store
the frequency of your favourite stations.
1
Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2
Press TUNING MODE on the remote
repeatedly until “AUTO” lights up in
the display.
3
Press TUNING +/– (or press –. or
>+ on the remote).
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. “TUNED” lights
up in the display. When a FM stereo
program is tuned in, “STEREO” lights up in
the display.
If “TUNED” does not lights up and the
scanning does not stop
Set the frequency of the radio station you
want as described in steps 2 and 3 of
“Manual tuning preset”.
4
Press TUNER MEMORY on the remote.
A preset number flashes in the display.
The stations are stored from preset
number 1.
To program Repeat steps
Other discs 3 and 5
Other tracks on the
same disc 4 and 5
Other tracks on
other discs 3 to 5
To Do this
Cancel Program
Play When playback is stopped, press
PLAY MODE on the remote
repeatedly until “PROGRAM”
disappear from the display.
Clear a track from
the end of program Press CLEAR on the remote
when playback is stopped.
Tuner
Presetting radio stations
LINK
Preset number
continued