Optional components, Hooking up optional components – Sony 2-661-374-11(4) User Manual

Page 27

Advertising
background image

O

p

ti

on
al

C
o

mp

on
en
ts

27

GB

To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.

A CD DIGITAL OUT jack

Use a digital optical cord (square, not supplied)
to connect the digital input jack of the optional
MD deck to this jack. You can then record
digital audio from this system. If the jack is
covered with a cap, remove it before use.

Notes

• There is no digital audio output from this jack during

playback of an MP3 audio track.

• (For MHC-GNX880/GNX780)

If “MPX L” or “MPX R” is selected, the digital audio
output from this jack will become monaural.

B VIDEO/MD (AUDIO IN) L/R

jacks

Use audio cords (not supplied) to connect the
audio output jacks of the optional component
(such as VCR or MD deck) to these jacks. You
can then output audio through this system.

C TV (AUDIO IN) L/R jacks

Use audio cords (not supplied) to connect the
audio output jacks of a TV to these jacks. You
can then output audio signal through this system.

D VIDEO OUT jack

(For MHC-GNX880/GNX780)

Use a video cord (supplied) to connect the video
input jack of a TV to this jack.

Optional Components

Hooking up optional components

*

TV

To the digital input
jack of the MD deck

From the audio output
jacks of the connected
component

MD deck

To the video input
jack of the TV

VCR, MD deck or

DVD player

* For MHC-GNX880/GNX780.

D-LIGHT SYNC
controller (DLS-1)

From the audio output
jacks of the TV

continued

Advertising