Sony KV-28DS65U - Manual (Page 11)

9
6. Automatically tuning the TV
1 Press the MENU button on the remote control to display
the menu on the TV screen.
2 Move the OK button on the remote control DOWN to
select the
symbol on the menu screen then move
RIGHT to enter the ‘PRESET’ menu.
3 Move the OK button DOWN to select “Programme
Setup” then move RIGHT to enter the ‘PROGRAMME
SETUP’ menu.
4 Move the OK button RIGHT to highlight the brackets
then move repeatedly DOWN to select ‘Digital’ if you
wish to view digital channels or ‘Analogue’ if you wish
to view analogue channels.
5 Press the OK button to confirm then move LEFT to
display the PRESET menu.
6 Move the OK button UP to select ‘Auto Programme’
then move the OK button RIGHT to display the
“AUTO PROGRAMME” menu.
7 Press the OK button to start the automatic tuning
process. The word ‘searching’ now flashes on the menu
screen and the TV starts to store all available channels.
When tuning digital channels, please be patient and do
not press any buttons as the tuning process takes
approximately twenty minutes depending on the number
of channels.
8 When the autotune procedure is complete, the PRESET
menu appears on the screen and the channel currently
being broadcast on programme 1 is displayed.
9 If you wish to tune in both the digital channels and the
analogue channels, repeat steps 3-8, remembering to
change your selection in step 4.
10 Press the MENU button to remove the ‘PRESET’ menu
from the TV screen.
Notes: • If you wish to stop the “autotune” procedure,
press the OK button then the MENU button on
the remote control.
• If, after tuning is complete, no digital
programme is displayed on the TV, repeat steps
1-10 but select ‘Analogue’ in the Programme
Setup menu screen. When digital programmes
become available in your area, repeat steps 1-10
above and select ‘Digital’ in the Programme
Setup menu screen.
Quick Start Guide
You can tune the TV to receive the new digital channels and/or the traditional analogue
channels. If at any time during this procedure you want to return to the normal TV picture,
press the MENU button.
Screen Position
SCREEN MODE
Screen Mode [zoom ]
[ 0 ]
Strobe
Auto 16:9
Correction
[on]
[off]
Screen Position
SCREEN MODE Screen Mode [zoom ]
[ 0 ]
Strobe
Auto 16:9
Correction [on]
[off]
PRESET
Auto Programme
Programme Setup
Manual Programme Preset
Programme Sorting
Parental Lock
Installation
AUTO PROGRAMME
START
Searching
PROG CH SERVICE
- - 63 S- -
26% complete
PROGRAMME SETUP
Programme Type [Digital]
PRESET
Auto Programme
Programme Setup
Manual Programme Preset
Programme Sorting
Parental Lock
Installation
PROGRAMME SETUP
Programme Type [Analogue]
PRESET
Auto Programme
Programme Setup
Manual Programme Preset
Programme Sorting
Parental Lock
Installation