Sony KV-28DS65U - Manual (Page 14)

12
Overview
Overview of the remote control buttons
To mute sound
Press to mute TV sound. Press again to
restore the sound.
To select channels
Press numbered buttons to select channels.
For double-digit programme numbers, e.g. 23,
press -/-- first, then the buttons 2 and 3.
If you enter an incorrect first digit, this should
be corrected by entering another digit (0 - 9)
and then selecting -/-- button again to enter
the programme number of your choice.
To display sound menu
Press to change the sound settings.
Press again to remove the display.
To adjust TV volume
Press to adjust the volume of the TV.
To temporarily switch off TV
Press to temporarily switch off TV. Press again
to switch on TV from standby mode.
NOTE: After 15 -30 minutes without a TV signal
and without any button being pressed, the TV
switches automatically into standby mode.
To reveal channel information
Press to reveal information on the channel you
are currently watching. Move the OK button on
the remote control RIGHT if you wish to
change the audio language then press the OK
button to confirm. Press the
button again to
remove the display.
To select channels
Press to select channels.
To change screen format
Press to change the size of the screen.
To display picture menu
Press to change the picture settings.
Press again to remove the display.
To select EPG
Press to display the Electronic Programme
Guide. Press again to remove display.
To select teletext
Press to select Teletext mode.
To return to TV mode
Press to return to the normal operation
from teletext mode or standby mode.
VCR on/off button
Press to temporarily switch off
VCR (if Sony VCR connected).
Press again to switch on VCR.
To return to previous channel
Press to return to the previous channel you were
watching. Note: This can be done only after
watching the present channel for 5 seconds.
To select menu items
Use this OK button to select options
available in the menu system of the TV.
To display the time
Open the remote control lid and
press to display the time on screen.
To operate video equipment
Open the remote control lid and press these
buttons to operate your video equipment
(please refer to your VCR manual).
To control other Sony equipment
With this selector you can control other Sony
equipment. Open the remote control lid and
set the selector according to the type of
equipment you want to control then use the
buttons on the remote control to operate the
equipment:
VTR1 : Sony Beta VCR
VTR2 : Sony 8mm VCR
VTR3 : Sony VHS VCR
VTR4 : Sony Digital VCR
MDP : Sony Multi Disc Player
To reset to factory-set levels
Open the remote control lid and
press to return picture and sound
settings to factory-set levels.
This button can be used in Teletext mode only.
Please see Teletext section of manual for
details.
These buttons have no function.
To freeze the picture
Press to freeze the picture.
Press again to cancel freeze.
To select input signal or freeze teletext
Press to select inputs from the TV sockets (see
Using Optional Equipment section).
In teletext mode, press to freeze the displayed
page. Press once again to cancel.
To display the menu
Press if you wish to use the TV menu system. Press
again to remove the menu from the TV screen.