Samsung DECT-8000 - Manual (Page 11)

18 19 B
ASIC
F
UNCTIONS
B
ASIC
F
UNCTIONS
You can enter the desired phone number in Standby mode,
and then dial the number. This way of dialing allows you to
make corrections to the number before dialing. Follow these
steps:
1. Enter a telephone number. Check the number in the LCD
window.
Notes:
• If you make a mistake while entering a number, press C/R
button to clear the last digit and correct the number.
• If you press and hold C/R button for more than one second,
all digits you have entered are cleared and the phone returns
to the Standby mode.
2. When the number appears correctly, press button.
Receiving a Call
When sombody calls you, the phone rings and the icon on
the display blinks.
If the caller can be identified, the caller’s phone number is
displayed. If the caller cannot be identified, only the icon
blinks.
1. To answer the call, press button. Or
If the handset is on the charger, simply lift it up. You do not
need to press
button.
Result: You are connected and the icon is steadily on. The
LCD window displays the call time. If the caller name
is currently stored in your internal phonebook, the
caller name displays.
2. You can speak. To end the call, either press button or
replace the handset on the charger.
Note: button does not work for 3 seconds to prevent the
phone from being disengaged, right after you lift the
phone from the charger to receive the call.
Call to
9876
Call from
1234567
Adams
1234567
00:05
Caller’s number
Blinks
Call time
Caller’s name