Samsung DECT-8000 - Manual (Page 9)

14 15 B
EFORE
U
SING
B
EFORE
U
SING
Register this handset to the base you will use. You can
register this handset up to four different bases.
Note: To register a handset to a base, the handset must be
within range of the base and the base should be set to the
Registration mode by your system administrator.
To register a handset:
1. Press MENU to display main menu items.
2. Press ❷ (or ") button repeatedly to choose 5:System, then
press OK button.
3. Enter the PIN code, then press OK button.
Note: PIN is preset to 0000 at factory. You can change the
PIN. For details, see page 51.
4. Press ❷ button to choose 2: Register, then press OK button.
5. Press ❷ (or ") button repeatedly to choose the base number
you want to specify for the base.
Note: If check symbol appears at the right side of the base
number, it indicates that the base number is already
registered on your handset.
Registering Handset
6. Press OK button.
Result: The LCD window displays the ID of the base unit.
7. Press OK button.
Result: The LCD window displays Enter AC.
8. Enter 9234, the Authentication Code, which is preset at factory.
9. Press OK button.
Result : When the registration is properly completed, the LCD
window displays the handset number and
SAMSUNG.
Note: If you have registered the handset to several bases, and
the base number you select at step 5 is already used for
another base, OVERWRITE warning appears. If you
press OK button, the old information is cleared and the
base number will be newly used for your newly selected
base. To keep old information, press and hold C/R
button to cancel the setting, then start over again with a
different base number.