Samsung DECT-8000 - Manual (Page 12)

20 21 B
ASIC
F
UNCTIONS
B
ASIC
F
UNCTIONS
Out of Range Indication
If the handset is too far from the registered base, the handset
cannot properly engage the telephone line, and the
icon at
the left bottom of the LCD window blinks and the signal
strength indication bars next to the
icon disappear.
If you move out of range during a call, the telephone line
might be disconnected and the handset returns to Standby
mode. Check if the
icon blinks in the LCD window. If so,
move the handset closer to the charger.
The icon is continuously displayed at the right bottom of
the LCD window. The icon shows the level of your bat-
tery. The more bars you see, the more power you have left.
When the battery is weak and a few minutes of talk time
remain, you will hear a warning tone and the
icon blinks.
When the battery becomes too weak for the phone to operate,
the handset will automatically turn off. Place the handset on
the charger to charge the handset batteries.
Battery Level Indicator
RANGE OUT
08/25 FRI 10:30A
This icon blinks
when the handset
is out of range.
1234 SAMSUNG
08/25 FRI 10:30A
Full Flat
During calls, " or ❷ button affects the ear piece volume.
You can adjust the volume from level 1 to 3. The voice volume
is displayed as bars on the bottom line of the LCD window.
The more bars you see, the louder the volume is.
Adjusting Voice Volume
Selecting Ring Type
You can define your own ringing sound. Six ring types are
available.
1. Press MENU to display main menu items.
2. Press ❷!(or " ) button repeatedly to choose 4: Bell&Beep,
then press OK button.
3. Press ❷!button to choose 2: RingType, then press OK but-
ton.
4. Press ❷!(or " ) button repeatedly to choose the ring type
you want.
Result: Each time you press ❷ or " button, the handset
sounds the ring you have chosen.
5. Press OK button to save the setting, then press to return
to Standby mode.
Adams
1234567
00:05
Ear piece volume indicator