Samsung DECT-8000 - Manual (Page 13)

22 23 B
ASIC
F
UNCTIONS
B
ASIC
F
UNCTIONS
Adjusting Ring Volume
1. Press MENU to display main menu items.
2. Press ❷!(or " ) button repeatedly to choose 4: Bell&Beep,
then press OK button.
3. Press ❷!(or " ) button repeatedly to choose 3: RingVol,
then press OK button.
Result: The current ring level is displayed.
4. Press ❷!(or " ) button repeatedly to choose the volume
level you want.
Result: You can adjust the volume from level 1 to 3. The higher,
the louder. You can also turn the ringer OFF. Each time
you press " or ❷ button, the handset sounds its
selected loudness.
5. Press OK button to save the setting, then press to return
to Standby mode.
Note: Setting “OFF” turns the ringer off. When a call comes
in, only the icon on the window blinks.
Last Number Redial
Your phone allows you to call the most recently dialed num-
bers again. The phone stores the last 10 numbers you called.
To view and dial the numbers:
1. Press LNR button in Standby mode.
Result: The LCD window displays the last number you dialed.
2. If you want to scroll through the memory, press ❷or "
button until you find the desired number you want to call.
3. Press button to dial the number.
Notes:
• If there is no number dialed, Empty is displayed.
• Each time you dial a new number, the oldest number stored
in the redial memory is automatically erased, and the redial
memory is updated.
• You can modify the number displayed before pressing
button by using C/R button.
• If you press LNR button, followed by button, the
phone dials the last number immediately.
• To erase all numbers in Redial memory, reset the handset. If
you reset the handset, all numbers stored in Redial memory
are erased. See page 52.