Sony VGN-FS800 User Manual
Page 72
72
Using Peripheral Devices
To connect in STB mode (Option 2)
1
Connect one end of the TV coaxial cable (1) (supplied) to your cable service access (wall outlet) (2). Connect the other
end to the VHF/UHF IN jack on the back panel of your set-top box (STB) (3).
2
Connect a second TV coaxial cable (4) (not supplied) to the VHF/UHF OUT jack on your set-top box (STB) unit (3).
Connect the other end to the VHF/UHF port (5) on the rear of your TV monitor or display.
3
Connect one end of a stereo A/V dubbing cable with triple RCA jacks (6) (not supplied), to the Composite Audio Out (L/
R) jacks (7) and the Video Out jack (8) on the back panel of your set-top box (STB) unit (3), matching the plug and jack
colors.
4
Connect the other RCA jacks of the stereo A/V dubbing cable (6) into the Composite Audio In (L/R) jacks (9) and the
Composite Video In jack (10) on the A/V port replicator, matching the plug and jack colors.