SUPER MICRO Computer X8STI-F - Manual (Page 51)

Chapter 2: Installation
2-27
LSI 1068E
NIC4 LED
JBMC1
Wake-On-LAN
The Wake-On-LAN header is located at
JWOL on the motherboard. See the table on
the right for pin definitions. (You must also
have a LAN card with a Wake-On-LAN con-
nector and cable to use this feature.)
Wake-On-LAN
Pin Definitions
(JWOL)
Pin# Definition
1 +5V Standby
2 Ground
3 Wake-up
A. WOL
B. I-Button (X8STi-3F only)
A
B
I-Button (X8STi-3F only)
An onboard I-Button, located next to the floppy
drive, is an 1-wire computer chip enclosed in
a durable stainless steel can. I-Button stores
instructions, provides electronic interface and
allows HostRAID to operate with Mega-RAID
firmware. Please note that I-Button does not
come with your motherboard.
Note: RAID 5 is supported when the
I-Button (AOC-IButton68) is installed
on the motherboard. For more infor-
mation on the AOC-IButton68, please
refer to http://www.supermicro.com/
products/accessories/addon/AOC-
IButton68.cfm.