SUPER MICRO Computer X8STI-F - Manual (Page 55)

Chapter 2: Installation
2-31
LSI 1068E
NIC4 LED
JBMC1
PCI Slot_SMB Enable
Jumper Settings
Jumper Setting Definition
Short Enabled
Open (Default) Disabled
A
B
A. JI 2 C1
B. JI 2 C2
C. VGA Enable
C
VGA Enable/Disable
Jumper Settings (JPG1)
Both Jumpers Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
VGA Enable
JPG1 allows you to enable or disable
the onboard VGA connector. The default
position is on pins 1 and 2 to enable
VGA. See the table on the right for
jumper settings.
PCI Slot_SMB Enable
Use Jumpers I
2 C1/I 2 C2 to enable PCI
Slot_SMB (System Management Bus)
support to improve system management
for the PCI slots. See the table on the
right for jumper settings.