SUPER MICRO Computer X8STI-F - Manual (Page 61)

Chapter 2: Installation
2-37
LSI 1068E
NIC4 LED
JBMC1
Onboard PWR LED Indicator
LED Settings
LED Color Definition
Off
System Off
On System on, or
System off and PWR
Cable Connected
Onboard Power LED
An Onboard Power LED is located at LE1
on the motherboard. When LE1 is on, the
AC power cable is connected. Make sure to
disconnect the power cable before removing
or installing any component. See the layout
below for the LED location.
A
A. Onboard PWR LED
B. BMC Heartbeat LED
BMC Heartbeat LED
A BMC (Baseboard Management Con-
troller) Heartbeat LED is located at DP1.
When DP1 blinks, the BMC functions
properly. Refer to the table on the right
for details. Also see the layout below for
the LED location.
BMC Heartbeat LED Indicator (DP1)
LED Settings
Green: Blinking BMC is ready for use
B