Preparing, Configuración de la videocámara – Samsung VP-W80 User Manual

Page 19

Advertising
background image

ENGLISH

ESPAÑOL

19

Configuración de la videocámara

Preparing

Para el uso de la batería

¿Qué duración tendrá la batería para filmar?

La frecuencia con que se usan las lentes de zoom.
Prepare tantas baterías como sea posible

Recarga de la batería

1. Conecte la batería a la

videocámara.

2. Conecte el adaptador de

corriente AC a un cable AC y
conecte el cable a una toma
de pared.

3. Conecte el cable DC a un jack

DC de la videocámara.

4. Apague la videocámara y el

indicador de recarga comen-
zará a parpadear y comenzará
la carga.
- Parpadeo una vez por

segundo: Indica que se ha
cargado menos del 50%.

- Parpadeo dos veces por

segundo: Indica que se ha
cargado el 50% ~ 75%.

- Parpadeo tres veces por

segundo: Indica que se ha
cargado el 75% ~ 100%.

- Se detiene el parpadeo y la luz es contínua:

Se ha completado la recarga.

- Encendido y apagado cada segundo: Indica algún

error. Vuelva a colocar la batería y el cable DC.

5. Si se ha completado la recarga, separe la videocámara,

el adaptador de corriente y la batería.
- Incluso si se ha apagado la cámara, se descargará la

batería.

Nota: La batería puede estar parcialmente cargada

en el momento de la compra.

To use the Battery Pack

How long will the battery last for recording?

Depends on how often you are likely to use the zoom
feature during recording.

Recharging the Battery Pack

1. Attach the battery pack to the

camcorder.

2. Connect the AC Power

Adapter to a AC cord and
plug the AC cord into a wall
socket.

3. Connect the DC cable to

the camcorder.

4. Turn the power off on the

camcorder, and the recharging
indicator will start flashing,
indicating the battery is
charging.

- Flashing once a second :

the battery is less
than 50% charged.

- Flashing twice a second :

the battery is between
50% ~ 75% charged.

- Flashing three times a second : the battery is

between 75% ~ 100% charged.

- Constantly stays on : Charging is complet.
- On for a second and off for a second : there is an

error and the charger needs to be reset.

5. If recharging is completed, separate the camcorder,

AC power adapter, and battery pack.

Even if the power is turned off, the battery will still
discharged over time if left connected to the camera.

Note: Battery pack may be charged a little at the time of

purchase.

1

4

2

3

OFF

00606K VP-W80 UK+ESP(1-19) 3/20/03 8:34 AM Page 19

Advertising
This manual is related to the following products: