Sony XR-F21RDS - Manual (Page 19)

Sony XR-F21RDS (
E
,F,G) 0-000-000-11 (1)
19
EN
Actual total number:
2
Play the track that you wish to enter into
memory.
3
Press the SEL button momentarily.
4 A To continue entering tracks, repeat
steps 2 and 3.
B To return to the normal playback
mode, press the PGM button for
more than two seconds.
Notes
• Configuration has been completed but the programme
will not play.
•
“*Wait*” appears on the display when the input track's
data has not yet been read into the memory, or when a
disc has not been put into the unit.
• “*Mem Full*” appears on the display when you try to
input more than 12 tracks into a programme at one time.
Playing an Arranged
Programme
By pressing the PGM button
momentarily you can designate the
programme(s) you wish to play.
The programme will begin playing two
seconds later.
If you press either side of the PRST/DISC
button during programme memory play,
programme memory play will be interrupted,
and playback of the selected disc starts.
Programme 1 Playback
Programme 2 Playback
Programme 1 and 2 Playback
P1 EN T + ER+
µ
DISC TRACK
CD1 3 2 10 P 2 .
The function of the PGM button changes cyclically
as follows:
* Only when tracks are programmemed into both "PGM1"
and "PGM2", "PGM1+2" will be displayed.
Note
If a programme has not been configured, it will not appear
on the display.
Furthermore, if neither Programme 1 nor
Programme 2 have been input in memory,
“NO Data” will appear on the display.
Notes
• If a track stored into programme memory is not
contained in the disc magazine, this track will be skipped
and the next track will be played.
• If the information about a track stored into programme
memory has not been loaded yet, this track will not be
played.
• When the disc magazine in the CD contains not a single
track stored into programme memory, or when
information about programme memory-stored tracks has
not been loaded yet, “Not Ready” will be displayed.
Cancelling from
Programme Mode
Press the PGM button momentarily
during Programme Mode playback.
n
“PGM OFF” appears on the display.
Once the Programme Mode has been
cancelled, the unit returns to normal playback
mode.
Erasing Input Tracks
1
Press the PGM button for more than
two seconds.
The unit will enter the programme edit
mode.
PGM OFF
PGM 1 PGM 2
PGM 1+2*
CD/MD Changer Operation/CD Programme Memory Function
PGM NO Da t a
Programme 1
Configuration
Indicator
DISC TRACK
CD1 5 3 10 P 8 .
PGM12
PGM 1
PGM12
PGM 2
PGM12
PGM 1+2
PGM OFF